For a FREE site survey please contact us on - 01784 440 211

We are proud installers of gate automation. We treat every install with the upmost respect and design each system to our customers requirements.

We only use the best automation equipment supplied to us by FAAC (UK) Ltd and BFT UK Ltd.

With our vast knowledge of installation of automatic gate systems we will listen to you and recommend the best kit that will suit your needs. Our work and automatic gate systems always comply with current government rules and regulations and safety is always at the front of our minds. With all of our low voltage motors including the sliding gate motors have a built in anti crush which allows objects to be released if they are caught in between the gates by reversing the direction of travel. The 230V motors have a forcing sensing system which we will set in guidance with the current EU regulations.

We recommend all gate automation systems to have a yearly service. The service on your system is vitally important because it will identify if any parts are failing and can be replaced promptly to ensure you do not have to replace the operators or control panels which can be costly. Our services cover all the mechanical moving parts including lubrication, a system test to check the condition of the electronic control board and we will also check to see if your system complies with the current EU regulations and if not we will report what needs to be replaced before we order the new parts.

We can provide various different types of automation including above ground operators or below ground systems that is more pleasing to the eye and compliments your style of gate. We also install sliding gate motors for additional security. With any systems we can add push buttons, key switches, loop detection and access control equipment.

Igea 230V or 24V - This strong reliable motor is designed for residential use with the option of a battery back up (24V version). The Igea is designed to do no more than 60 operations per day and up to 250Kg per gate leaf. This unit is also ideal if you have large gate posts that you can not install a ram style system to. With all the motors we provide there is a built in manual release mechanism for access in and out if there is a power failure.

Eli 250 230V or 24V - This motor is designed to sit in a steel foundation box at ground level. This motor can perform 100 operations per day and the maximum gate weight is 300kg per leaf. Once installed to your gate this motor is pleasing to the eye and will give the best impression to visitors and guests.  With all the motors we provide there is a built in manual release mechanism for access in and out if there is a power failure.

 

SUB and SUB R 230V motor. This strong duriable motor is designed for high usage entrances. The motor can perform 500 operations per day and can take up to 800kg per motor. The motor sits in a below ground foundation box and is complemented with the Rigel 5 control panel with slow down, automatic closing and many other functions. This motor requires ground stops in the open and closed position. With all of our motors there is a built in manual release for access in and out if there is a power failure.

Urano, Icaro and Deimos. We can provide a wide range of sliding gate motors from low domestic use to a continuous duty cycle motor that will open and close all day long. All the sliding gate motors have a built in anti crush system which when activated will hit an object and reverse to allow the object to get free. With all of our motors there is a built in manual release for access in and out if there is a power failure.